[Updates of this version]

• The following new features, improvements, and  bug fixes are available.

1. Side-by-Side display of 4K SDI/IP signals
2. BVMK-R10 support
3. Setting copy function among BVM-HXxx10
4. Additional support for Closed Caption over 3G-SDI signals
5. Source ID display
6. Status F key
7. Picture out Display
8. 7휴대용 오디오 플레이어/워크맨
9. Scopes 2x display
10. IP Interface function Status display over Web menu

1. Peak Lumi. 4000/3000/2000/1000/700/600/500/400 from Peak Lumi.4x, 2x and Off
2. 300% Pixel Zoom function from 9 zones of the screen
3. Tally response time

1. Embedded Audio
2. Native Scan about 1920 x 1080/24PsF
3. Noises about non-selected SDI input
4. Accuracy of long-term color temperature reinforcement

For further details, please refer to the Release Notes for_BVM-HX3110_V2_00(EN).pdf.

[Applicable version]

Note：

• BVM-HX3110 Ver.1.00 or later
• The software version for the monitor can be found on the Unit Status of the Status menu.

[Preparation]

When updating Monitor body,

• You will need 1 USB memory stick for the installation.
  Specification: USB 3.0 up to 8GB, FAT32 format
  For more details, please read “Handling a USB memory stick” in the operating instructions of the BVM-HX3110.

When updating NET board,

• Prepare the following IP network connection environment.
  • IP network switch (25/1 Gbps ports)
  • SFP28 Transceiver module
  • Optical fiber cable
  • Media converter (1Gbps, SFP to RJ-45)
  • LAN cable
  • PC (for operation of Web menu, Browser is required.)
  • Recommended browser: Chrome (The latest version is required.)

* Chrome browser and Chrome are trademarks of Google LLC.

Note：

• You need to update both the software and the hardware/FPGA.  You also need to update both the Bootloader and Software Package of the NET board.
  • Refer to the following information for the estimated update time for each BVM-HX3110 unit.
  • Monitor body(Software / FPGA): this update procedure takes approx. 107 minutes per unit.
  • IP interface function , this update procedure takes approx.2 minutes for the Bootloader and approx. 6 munites for the Software Package.

1붐박스, 라디오 및 휴대용 CD 플레이어

• Please refer to "Release Notes_for_BVM-HX3110_V2_00(EN).pdf”.
• If the update of “Software Package” is executed FIRST, the update of “Bootloader” will fail displaying a file error.To fix this, download "BVM-HX3110_Bootloader_for_update_error.zip" from the Sony support site and follow "Note for BVM-HX3110_V2_Bootloader_update_error(EN).pdf".